Products >> Water Treatment Equipment >>

Pressurized UF Membrane Modules

Pressurized UF Membrane Modules

Product features and benefits

• Excellent quality product water

• Low capital cost and compact design

• Ease of maintenance

Application

Broad range of application for the treatment of high BOD and/or suspended

solids containing wastewater from:

1. Municipal sewage treatment

2. Industrial wastewater treatment including chemical waste and food waste

3. Livestock wastewater treatment

4. Landfill leachate treatment

Pressurized UF Membrane Modules
MODEL		UF-4040	UF-6060	UF-8060	UF-8080

Specification	Membrane Material	PVDF
	Operation Mode	Outside-in
	Nominal Pore Size	0.03um
	Inside/Outside Diameter	0.7/1.3mm
	Available Membrane Area(sq.m.)	8.3	35	55	75
	Dimension	Ф90*1125	Ф160×1814 mm	Ф225*1757	Ф225*2257
	Connector Size	DN25	DN40	DN50	DN50
	Case Material	UPVC	UPVC	UPVC	UPVC
	Encapsulation Material of Bottom	Epoxy resins/polyurethane
	Filtering Type	Dead end or cross-flow filtration
	Turbidity of Permeate	<=0.2NTU
	SDI15 of Permeate	<=2.5
Feed Conditions	Turbidity	<=300NTU
	PH	2~10
	Pre-filtration	100~300um
	Temperature	1~40 Degree Celsius
Typcial Filtrate Flux		30~120L/sq.m.*H,25 Degree Celsius
Max TMP		0.2Mpa
Backwash Conditions	Frequency	Every 20-60mins(According to water quality or result of the pilot testing)
	Pressure	<=0.2Mpa
	Flux	80-120L/sq.m.*H
Air Scour Conditions	Air Pressure	<=0.2Mpa
	Air Flow per Module	4-10 Nm3/H
Chemical Enhanced Backwash	Frequency	Every 12-24H(According to water quality or result of the pilot testing)
	Cleaning Solutions	0.1%HCI(More or less duo to water quality)
		0.05%NaOH+0.1%NaCIO(More or less duo to water quality)
Clean In Place	Frequency	When TMP exceeds 0.08-0.1Mpa above starting TMP,and can't recover by Backwash,air scour and Chemical enhanced backwash

	Cleaning Solutions	2% Oxalic,1-2% Citric or 0.4%HCI
		0.1%NaOH+0.2%NaCIO(Active Chlorine)